前前后后折腾好几天，还是没搞定。只能来求助 V 友了。
- 公司用的是 secoclient 来连接公司内网的。
- 连接上之后，已经可以正常 ping 公司的 Win 了。
- 用 telnet 测试端口，显示以下结果。
FanydeMac-mini:~ root# telnet 10.23.110.4 22 Trying 10.23.110.4... Connected to 10.23.110.4. Escape character is '^]'. SSH-2.0-OpenSSH_for_Windows_8.1 - 公司 Win 的 OpenSSH 的客户端和服务端都已安装，也都设置为自启动。
- 公钥和私钥都已设置，我是在 Win 上生成了公钥和私钥，然后把公钥放在了 Win 上，私钥放在了 Mac 上。不知道这样对不对。
- 最后通过 SSH 连接的时候，显示以下结果，密码是对的，但是就是连接不上。
FanydeMac-mini:~ root# ssh [email protected] [email protected]'s password: Permission denied, please try again. [email protected]'s password: Permission denied, please try again. [email protected]'s password: [email protected]: Permission denied (publickey,password,keybard-interactive). Win 的 C:\Windows\System32\drivers\OpenSSH\sshd_config_default 配置如下
# This is the sshd server system-wide configuration file. See # sshd_config(5) for more information. # The strategy used for options in the default sshd_config shipped with # OpenSSH is to specify options with their default value where # possible, but leave them commented. Uncommented options override the # default value. #Port 22 #AddressFamily any #ListenAddress 0.0.0.0 #ListenAddress :: #HostKey __PROGRAMDATA__/ssh/ssh_host_rsa_key #HostKey __PROGRAMDATA__/ssh/ssh_host_dsa_key #HostKey __PROGRAMDATA__/ssh/ssh_host_ecdsa_key #HostKey __PROGRAMDATA__/ssh/ssh_host_ed25519_key # Ciphers and keying #RekeyLimit default none # Logging #SyslogFacility AUTH #LogLevel INFO # Authentication: #LoginGraceTime 2m #PermitRootLogin prohibit-password #StrictModes yes #MaxAuthTries 6 #MaxSessions 10 #PubkeyAuthentication yes # The default is to check both .ssh/authorized_keys and .ssh/authorized_keys2 # but this is overridden so installations will only check .ssh/authorized_keys AuthorizedKeysFile .ssh/authorized_keys #AuthorizedPrincipalsFile none # For this to work you will also need host keys in %programData%/ssh/ssh_known_hosts #HostbasedAuthentication no # Change to yes if you don't trust ~/.ssh/known_hosts for # HostbasedAuthentication #IgnoreUserKnownHosts no # Don't read the user's ~/.rhosts and ~/.shosts files #IgnoreRhosts yes # To disable tunneled clear text passwords, change to no here! #PasswordAuthentication yes #PermitEmptyPasswords no # GSSAPI options #GSSAPIAuthentication no #AllowAgentForwarding yes #AllowTcpForwarding yes #GatewayPorts no #PermitTTY yes #PrintMotd yes #PrintLastLog yes #TCPKeepAlive yes #UseLogin no #PermitUserEnvironment no #ClientAliveInterval 0 #ClientAliveCountMax 3 #UseDNS no #PidFile /var/run/sshd.pid #MaxStartups 10:30:100 #PermitTunnel no #ChrootDirectory none #VersionAddendum none # no default banner path #Banner none # override default of no subsystems Subsystem sftp sftp-server.exe # Example of overriding settings on a per-user basis #Match User anoncvs # AllowTcpForwarding no # PermitTTY no # ForceCommand cvs server Match Group administrators AuthorizedKeysFile __PROGRAMDATA__/ssh/administrators_authorized_keys 我其实是想用 VScode 远程开发服务，希望 V 友能帮帮我。
Select Language