OpenWrt 是一个专门面向嵌入式设备的 Linux 发行版。你可以将 OpenWrt 支持的型号的嵌入式设备，比如各种路由器上的系统，换成一个有更多可能性可以折腾的 Linux 系统。 OpenWrt 官方网站
这是一个创建于 1433 天前的主题，其中的信息可能已经有所发展或是发生改变。
路由器是 小米 mini R1C 先刷了 Breed ，又刷了 OpenWRT Lean
刷完之后会不定时自动重启... 问题是重启就一次时间很长，特别影响体验...
Google 了一下，有说因为开了 SFE 的，但是我看固件里不包含 SFE 啊。 还有说因为闪存太小。我重新把系统 root 挂在点设置在了外置 U 盘，但是还是会重启。
有遇到类似情况的大佬吗... 是固件不稳定，还是小米路由器 mini 有问题呀...
CPU 是 MT7620 单核，性能确实不高，但是也不应该这样啊。
第 1 条附言 2022 年 3 月 1 日
感觉找到问题原因了...路由器电源电流不稳 + 插排接触不良。
更换路由器原装电源 + 更换插排解决了...
小米 mini 路由器除了配置低点以外可玩性还是很高的，刷了 Pandorabox 14.09 系统 + 重新部署 entware （不要直接修改源到 entware ，部署位置和 OpenWRT 不一样） ，还是很有搞头的...
更换路由器原装电源 + 更换插排解决了...
小米 mini 路由器除了配置低点以外可玩性还是很高的，刷了 Pandorabox 14.09 系统 + 重新部署 entware （不要直接修改源到 entware ，部署位置和 OpenWRT 不一样） ，还是很有搞头的...
 | 1 monetto OP 最后几条系统日志如下 Fri Feb 25 08:27:11 2022 daemon.notice hostapd: ACS: Survey is missing noise floor Fri Feb 25 08:27:11 2022 daemon.notice hostapd: ACS: Survey is missing noise floor Fri Feb 25 08:27:11 2022 daemon.notice hostapd: ACS: Survey is missing noise floor Fri Feb 25 08:27:11 2022 daemon.notice hostapd: ACS: Survey is missing noise floor Fri Feb 25 08:27:11 2022 daemon.notice hostapd: ACS: Survey is missing noise floor Fri Feb 25 08:27:11 2022 daemon.notice hostapd: ACS: Survey is missing noise floor Fri Feb 25 08:27:11 2022 daemon.notice hostapd: ACS: Survey is missing noise floor Fri Feb 25 08:27:11 2022 daemon.notice hostapd: ACS: Survey is missing noise floor Fri Feb 25 08:27:11 2022 daemon.notice hostapd: wlan1-1: ACS-COMPLETED freq=2462 channel=11 Fri Feb 25 08:27:12 2022 daemon.notice hostapd: wlan1-1: interface state ACS->ENABLED Fri Feb 25 08:27:12 2022 daemon.notice hostapd: wlan1-1: AP-ENABLED Fri Feb 25 08:27:12 2022 daemon.notice netifd: Interface 'wwan' is enabled Fri Feb 25 08:27:13 2022 daemon.notice wpa_supplicant[1435]: wlan1: SME: Trying to authenticate with a8:61:df:1c:d3:b8 (SSID='CMCC-tt51' freq=2427 MHz) Fri Feb 25 08:27:13 2022 kern.info kernel: [ 82.645303] wlan1: authenticate with a8:61:df:1c:d3:b8 Fri Feb 25 08:27:13 2022 kern.info kernel: [ 82.675371] wlan1: send auth to a8:61:df:1c:d3:b8 (try 1/3) Fri Feb 25 08:27:13 2022 daemon.notice wpa_supplicant[1435]: wlan1: Trying to associate with a8:61:df:1c:d3:b8 (SSID='CMCC-tt51' freq=2427 MHz) Fri Feb 25 08:27:13 2022 kern.info kernel: [ 82.692685] wlan1: authenticated Fri Feb 25 08:27:13 2022 kern.info kernel: [ 82.705583] wlan1: associate with a8:61:df:1c:d3:b8 (try 1/3) Fri Feb 25 08:27:13 2022 kern.info kernel: [ 82.718839] wlan1: RX AssocResp from a8:61:df:1c:d3:b8 (capab=0x431 status=0 aid=1) Fri Feb 25 08:27:13 2022 kern.info kernel: [ 82.727170] wlan1: associated Fri Feb 25 08:27:13 2022 daemon.notice netifd: Network device 'wlan1' link is up Fri Feb 25 08:27:13 2022 daemon.notice netifd: Interface 'wwan' has link connectivity Fri Feb 25 08:27:13 2022 daemon.notice netifd: Interface 'wwan' is setting up now Fri Feb 25 08:27:13 2022 daemon.notice wpa_supplicant[1435]: wlan1: Associated with a8:61:df:1c:d3:b8 Fri Feb 25 08:27:13 2022 daemon.notice wpa_supplicant[1435]: wlan1: CTRL-EVENT-SUBNET-STATUS-UPDATE status=0 Fri Feb 25 08:27:13 2022 daemon.notice wpa_supplicant[1435]: wlan1: WPA: Key negotiation completed with a8:61:df:1c:d3:b8 [PTK=CCMP GTK=CCMP] Fri Feb 25 08:27:13 2022 daemon.notice wpa_supplicant[1435]: wlan1: CTRL-EVENT-CONNECTED - Connection to a8:61:df:1c:d3:b8 completed [id=0 id_str=] Fri Feb 25 08:27:13 2022 kern.info kernel: [ 82.826206] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready Fri Feb 25 08:27:13 2022 kern.info kernel: [ 83.208382] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1-1: link becomes ready Fri Feb 25 08:27:13 2022 kern.info kernel: [ 83.215385] br-lan: port 2(wlan1-1) entered blocking state Fri Feb 25 08:27:13 2022 kern.info kernel: [ 83.220989] br-lan: port 2(wlan1-1) entered forwarding state Fri Feb 25 08:27:13 2022 daemon.notice netifd: Network device 'wlan1-1' link is up Fri Feb 25 08:27:13 2022 daemon.notice netifd: wwan (3434): udhcpc: started, v1.35.0 Fri Feb 25 08:27:14 2022 daemon.notice netifd: wwan (3434): udhcpc: broadcasting discover Fri Feb 25 08:27:14 2022 daemon.notice netifd: wwan (3434): udhcpc: broadcasting select for 192.168.1.7, server 192.168.1.1 Fri Feb 25 08:27:15 2022 daemon.notice netifd: wwan (3434): udhcpc: lease of 192.168.1.7 obtained from 192.168.1.1, lease time 86400 Fri Feb 25 08:27:15 2022 daemon.notice netifd: Interface 'wwan' is now up Fri Feb 25 08:27:16 2022 user.notice firewall: Reloading firewall due to ifup of wwan (wlan1) Fri Feb 25 08:27:18 2022 user.notice nlbwmon: Reloading nlbwmon due to ifup of wwan (wlan1) Fri Feb 25 08:27:22 2022 daemon.notice ttyd[3907]: ttyd 1.6.3 (libwebsockets 4.1.6-20211107-361-g8cbe8fa4e) Fri Feb 25 08:27:22 2022 daemon.notice ttyd[3907]: tty configuration: Fri Feb 25 08:27:22 2022 daemon.notice ttyd[3907]: start command: /bin/login Fri Feb 25 08:27:22 2022 daemon.notice ttyd[3907]: close signal: SIGHUP (1) Fri Feb 25 08:27:22 2022 daemon.notice ttyd[3907]: terminal type: xterm-256color Fri Feb 25 08:27:22 2022 daemon.notice ttyd[907]: LWS: 4.1.6-20211107-361-g8cbe8fa4e, loglevel 7 Fri Feb 25 08:27:22 2022 daemon.notice ttyd[3907]: NET CLI SRV H1 H2 WS IPV6-off Fri Feb 25 08:27:22 2022 daemon.notice ttyd[3907]: /usr/lib/libwebsockets-evlib_uv.so Fri Feb 25 08:27:22 2022 daemon.notice ttyd[3907]: Using foreign event loop... Fri Feb 25 08:27:22 2022 daemon.notice ttyd[3907]: Listening on port: 7681 Fri Feb 25 09:16:54 2022 daemon.notice procd: /etc/rc.d/S99zerotier: disabled in config Fri Feb 25 09:16:55 2022 daemon.info procd: - init complete - Fri Feb 25 09:17:14 2022 daemon.info hostapd: wlan1-1: STA c2:c9:73:b7:a9:ff IEEE 802.11: authenticated Fri Feb 25 09:17:14 2022 daemon.info hostapd: wlan1-1: STA c2:c9:73:b7:a9:ff IEEE 802.11: associated (aid 1) Fri Feb 25 09:17:14 2022 daemon.notice hostapd: wlan1-1: AP-STA-CONNECTED c2:c9:73:b7:a9:ff Fri Feb 25 09:17:14 2022 daemon.info hostapd: wlan1-1: STA c2:c9:73:b7:a9:ff RADIUS: starting accounting session 9D3CBC8C99FBFE6B Fri Feb 25 09:17:14 2022 daemon.info hostapd: wlan1-1: STA c2:c9:73:b7:a9:ff WPA: pairwise key handshake completed (RSN) Fri Feb 25 09:17:14 2022 daemon.notice hostapd: EAPOL-4WAY-HS-COMPLETED c2:c9:73:b7:a9:ff Fri Feb 25 09:17:23 2022 daemon.info hostapd: wlan0: STA a4:5e:60:e5:38:bb IEEE 802.11: authenticated Fri Feb 25 09:17:23 2022 daemon.info hostapd: wlan0: STA a4:5e:60:e5:38:bb IEEE 802.11: associated (aid 1) Fri Feb 25 09:17:23 2022 daemon.notice hostapd: wlan0: AP-STA-CONNECTED a4:5e:60:e5:38:bb Fri Feb 25 09:17:23 2022 daemon.info hostapd: wlan0: STA a4:5e:60:e5:38:bb RADIUS: starting accounting session 232888D40C5B612E Fri Feb 25 09:17:23 2022 daemon.info hostapd: wlan0: STA a4:5e:60:e5:38:bb WPA: pairwise key handshake completed (RSN) Fri Feb 25 09:17:23 2022 daemon.notice hostapd: wlan0: EAPOL-4WAY-HS-COMPLETED a4:5e:60:e5:38:bb |
| 2 monetto OP 最后几条内核日志如下 [ 1.062368] Run /sbin/init as init process [ 2.569804] random: fast init done [ 4.338106] init: Console is alive [ 4.342299] init: - watchdog - [ 8.830150] kmodloader: loading kernel modules from /etc/modules-boot.d/* [ 10.074631] usbcore: registered new interface driver usbfs [ 10.080411] usbcore: registered new interface driver hub [ 10.085937] usbcore: registered new device driver usb [ 10.106679] ANTFS Module: Version 07.19-b41ba529 [ 10.114912] exfat: module is from the staging directory, the quality is unknown, you have been warned. [ 10.127610] exFAT: Version 1.3.0 [ 10.172224] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 10.189258] SCSI subsystem initialized [ 10.200486] ehci-fsl: Freescale EHCI Host controller driver [ 10.208399] ehci-platform: EHCI generic platform driver [ 10.224185] phy phy-usbphy.0: remote usb device wakeup disabled [ 10.230253] phy phy-usbphy.0: UTMI 16bit 30MHz [ 10.234790] ehci-platform 101c0000.ehci: EHCI Host Controller [ 10.240708] ehci-platform 101c0000.ehci: new USB bus registered, assigned bus number 1 [ 10.248917] ehci-platform 101c0000.ehci: irq 26, io mem 0x101c0000 [ 10.263825] ehci-platform 101c0000.ehci: USB 2.0 started, EHCI 1.00 [ 10.271322] hub 1-0:1.0: USB hub found [ 10.275708] hub 1-0:1.0: 1 port detected [ 10.287203] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 10.295586] ohci-platform: OHCI generic platform driver [ 10.301217] ohci-platform 101c1000.ohci: Generic Platform OHCI controller [ 10.308278] ohci-platform 101c1000.ohci: new USB bus registered, assigned bus number 2 [ 10.316496] ohci-platform 101c1000.ohci: irq 26, io mem 0x101c1000 [ 10.348649] hub 2-0:1.0: USB hub found [ 10.352938] hub 2-0:1.0: 1 port detected [ 10.361169] uhci_hcd: USB Universal Host Controller Interface driver [ 10.378391] usbcore: registered new interface driver usb-storage [ 10.385893] kmodloader: done loading kernel modules from /etc/modules-boot.d/* [ 10.398105] init: - preinit - [ 10.817846] usb 1-1: new high-speed USB device number 2 using ehci-platform [ 11.945535] usb-storage 1-1:1.0: USB Mass Storage device detected [ 12.637608] scsi host0: usb-storage 1-1:1.0 [ 12.967135] random: procd: uninitialized urandom read (4 bytes read) [ 13.702508] scsi 0:0:0:0: Direct-Access Mass Storage Device 1.00 PQ: 0 ANSI: 0 CCS [ 13.990621] sd 0:0:0:0: [sda] 249737216 512-byte logical blocks: (128 GB/119 GiB) [ 14.004597] random: jshn: uninitialized urandom read (4 bytes read) [ 14.011172] sd 0:0:0:0: [sda] Write Protect is off [ 14.016070] sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00 [ 14.017061] sd 0:0:0:0: [sda] No Caching mode page found [ 14.022587] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 14.401476] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 14.513219] random: jshn: uninitialized urandom read (4 bytes read) [ 14.673492] random: jshn: uninitialized urandom read (4 bytes read) [ 19.036750] 8021q: adding VLAN 0 to HW filter on device eth0 [ 21.217424] mount_root: loading kmods from internal overlay [ 21.300416] kmodloader: loading kernel modules from //etc/modules-boot.d/* [ 21.315823] kmodloader: done loading kernel modules from //etc/modules-boot.d/* [ 24.093056] jffs2: notice: (537) jffs2_build_xattr_subsystem: complete building xattr subsystem, 36 of xdatum (31 unchecked, 4 orphan) and 50 of xref (4 dead, 1 orphan) found. [ 24.110122] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab [ 24.733852] EXT4-fs (sda): recovery complete [ 24.739052] EXT4-fs (sda): mounted filesystem with ordered data mode. Opts: [ 24.756456] mount_root: switched to extroot [ 24.769803] urandom-seed: Seeding with /etc/urandom.seed [ 24.933037] procd: - early - [ 24.936554] procd: - watchdog - [ 25.257242] urandom_read: 4 callbacks suppressed [ 25.257251] random: jshn: uninitialized urandom read (4 bytes read) [ 25.461689] random: jshn: uninitialized urandom read (4 bytes read) [ 25.604459] procd: - watchdog - [ 25.613111] procd: - ubus - [ 25.671976] procd: - init - |
 | 3 Illusionary 2022 年 2 月 25 日  1 上 x86 吧，这种冷门型号不稳定很正常，说不定是驱动不好 |
| 4 monetto OP 从日志上看起来好像没啥问题呀... 有遇到过类似情况的大佬吗.. |
| 5 monetto OP @Illusionary 唉，专门海鲜市场买了一个回家玩玩...这也太坑了。 |
 | 6 0o0O0o0O0o 2022 年 2 月 25 日 1 这是 openwrt 的一个 fork 吧，这个型号 openwrt.org 也支持，你可以先试试原版 |
 | 7 banricho 2022 年 2 月 25 日 1 路由器刷 OpenWrt 本来就有可能不稳定，我之前 R7800 试了无数个版本，还是会不定时出点小问题。 后来我老老实实，主路由用官方固件，OpenWrt 做旁路由，每天半夜定时重启，再也没出过问题。 旁路由才是 yyds ，那次搞完以后大半年过去了网络再也没出过问题，也不用折腾了～ |
 | 8 blueboyggh 2022 年 2 月 25 日 1 MTK 的可以试试 padavan 的固件，适配的比较好，openwrt 还是适合 arm 和 x86 |
 | 9 jsq2627 2022 年 2 月 25 日 1 试试刷原版 openwrt 我之前也是刷 lean ，编译了很多次，尝试了很多种软件组合，总是会遇到隔几天死机重启 前段时间自从刷回了原版 openwrt ，特别稳，最长 uptime 60 多天，最后还是因为家里停电关机了 |
| 10 monetto OP |
 | 12 Acoffice 2022 年 2 月 26 日 via Android 翻车雕，正常 |
Select Language