可能是住院期间过于无聊需要找一点事情做（。
其实看上去 MSM8994 的主线情况还是不错的（虽然不像 APQ8016/APQ8096 一样有 SBC，这两款的主线情况是最好的），除了设备树不齐，某些缺的 GCC/RPM 时钟需要补上，还需要一个 qcom,pcie-msm8994 的 PCIe 控制器。补上设备树后很多东西开箱能用。目前跑的是 4.18.6。rootfs 是直接 debootstrap 出来的。
走的 ARM64 UEFI + GRUB 启动，没有用 lk/uboot （都有 UEFI 用了，为什么要用那种玩意？）
Note: 现在这批 "Always Conncted PC" 也就是跑 8998/SDM850 的 Windows PC 虽然没有锁 Secure Boot，但是跑 Linux 有困难，因为它们的固件加载的位置太低了。UEFI 规范建议固件加载得越高越好，虽然这不是强制性要求。跑 Windows 和 XNU （其他系统我没测过）都是没问题的。我自己给 8994 写的 UEFI 实现加载在内存中段，留了足够多的 bottom memory 给 Linux
最后留一个 boot log 开头摘要：
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd032] [ 0.000000] Linux version 4.18.6-lumia-950xl-uefi (imbushuo@lumia-bldag-bl1) (gcc version 6.3.0 20170516 (Debian 6.3.0-18)) #2 SMP PREEMPT Wed Oct 31 00:35:34 EDT 2018 [ 0.000000] Machine model: Microsoft Lumia 950 XL Single SIM (RM-1085) [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: EFI v2.70 by Little Moe, LLC. [ 0.000000] efi: ACPI=0x5f030000 ACPI 2.0=0x5f030014 SMBIOS=0x5eb90000 SMBIOS 3.0=0x5eb40000 MEMATTR=0x5e9a0018 [ 0.000000] cma: Reserved 32 MiB at 0x00000000de000000 [ 0.000000] NUMA: No NUMA configuration found [ 0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x00000000dfffffff] [ 0.000000] NUMA: NODE_DATA [mem 0xddfdb980-0xddfdd13f] [ 0.000000] Zone ranges: [ 0.000000] DMA32 [mem 0x0000000000100000-0x00000000dfffffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000002fffff] [ 0.000000] node 0: [mem 0x0000000000300000-0x000000000038ffff] [ 0.000000] node 0: [mem 0x0000000000390000-0x00000000003fffff] [ 0.000000] node 0: [mem 0x0000000000400000-0x0000000000bfffff] [ 0.000000] node 0: [mem 0x0000000000c00000-0x00000000064fffff] [ 0.000000] node 0: [mem 0x0000000006500000-0x00000000069fffff] [ 0.000000] node 0: [mem 0x0000000006c00000-0x000000000f1fffff] [ 0.000000] node 0: [mem 0x000000000f200000-0x000000005c8c2fff] [ 0.000000] node 0: [mem 0x000000005c8c3000-0x000000005c9ddfff] [ 0.000000] node 0: [mem 0x000000005c9de000-0x000000005e96ffff] [ 0.000000] node 0: [mem 0x000000005e970000-0x000000005e98ffff] [ 0.000000] node 0: [mem 0x000000005e990000-0x000000005eb2ffff] [ 0.000000] node 0: [mem 0x000000005eb30000-0x000000005eb5ffff] [ 0.000000] node 0: [mem 0x000000005eb60000-0x000000005eb8ffff] [ 0.000000] node 0: [mem 0x000000005eb90000-0x000000005eb9ffff] [ 0.000000] node 0: [mem 0x000000005eba0000-0x000000005ebbffff] [ 0.000000] node 0: [mem 0x000000005ebc0000-0x000000005ecfffff] [ 0.000000] node 0: [mem 0x000000005ed00000-0x000000005ed2ffff] [ 0.000000] node 0: [mem 0x000000005ed30000-0x000000005ed3ffff] [ 0.000000] node 0: [mem 0x000000005ed40000-0x000000005ed4ffff] [ 0.000000] node 0: [mem 0x000000005ed50000-0x000000005ee8ffff] [ 0.000000] node 0: [mem 0x000000005ee90000-0x000000005eedffff] [ 0.000000] node 0: [mem 0x000000005eee0000-0x000000005f01ffff] [ 0.000000] node 0: [mem 0x000000005f020000-0x000000005ff9ffff] [ 0.000000] node 0: [mem 0x000000005ffa0000-0x000000005ffeffff] [ 0.000000] node 0: [mem 0x000000005fff0000-0x000000005fffffff] [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000dfffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000100000-0x00000000dfffffff] [ 0.000000] On node 0 totalpages: 785664 [ 0.000000] DMA32 zone: 12276 pages used for memmap [ 0.000000] DMA32 zone: 0 pages reserved [ 0.000000] DMA32 zone: 785664 pages, LIFO batch:31 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.0 [ 0.000000] random: get_random_bytes called from start_kernel+0xac/0x414 with crng_init=0 [ 0.000000] percpu: Embedded 23 pages/cpu @(____ptrval____) s54232 r8192 d31784 u94208 [ 0.000000] pcpu-alloc: s54232 r8192 d31784 u94208 alloc=23*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] CPU features: enabling workaround for ARM errata 826319, 827319, 824069 [ 0.000000] CPU features: enabling workaround for ARM erratum 843419 [ 0.000000] CPU features: enabling workaround for ARM erratum 845719 [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 773388 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.18.6-lumia-950xl-uefi nomodeset acpi=off earlyprintk=efi video=efifb root=UUID=4773c028-90b2-4032-bac6-b23126ef8f94 [ 0.000000] Memory: 2867332K/3142656K available (7356K kernel code, 718K rwdata, 2776K rodata, 640K init, 339K bss, 242556K reserved, 32768K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8. [ 0.000000] Tasks RCU enabled. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] arch_timer: cp15 and mmio timer(s) running at 19.20MHz (virt/virt). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns [ 0.000006] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns [ 0.000213] Console: colour dummy device 80x25 [ 0.001147] console [tty0] enabled [ 0.001215] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800) [ 0.001248] pid_max: default: 32768 minimum: 301 [ 0.001357] Security Framework initialized [ 0.003169] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.004082] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.004159] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.004207] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.027993] ASID allocator initialised with 32768 entries [ 0.035990] Hierarchical SRCU implementation. [ 0.044231] Remapping and enabling EFI services. [ 0.044415] efi: memattr: Entry attributes invalid: RO and XP bits both cleared [ 0.044449] efi: memattr: ! 0x000000300000-0x00000037ffff [Runtime Code |RUN| | | | | | | | | | | ] [ 0.052033] smp: Bringing up secondary CPUs ... [ 0.084858] Detected VIPT I-cache on CPU1 [ 0.084921] CPU1: Booted secondary processor 0x0000000001 [0x410fd032] [ 0.116903] Detected VIPT I-cache on CPU2 [ 0.116944] CPU2: Booted secondary processor 0x0000000002 [0x410fd032] [ 0.148978] Detected VIPT I-cache on CPU3 [ 0.149016] CPU3: Booted secondary processor 0x0000000003 [0x410fd032] [ 0.182264] CPU features: enabling workaround for ARM erratum 832075 [ 0.182276] CPU features: enabling workaround for EL2 vector hardening [ 0.182291] Detected PIPT I-cache on CPU4 [ 0.182370] CPU4: Booted secondary processor 0x0000000100 [0x411fd071] [ 0.213271] Detected PIPT I-cache on CPU5 [ 0.213340] CPU5: Booted secondary processor 0x0000000101 [0x411fd071] [ 0.245384] Detected PIPT I-cache on CPU6 [ 0.245457] CPU6: Booted secondary processor 0x0000000102 [0x411fd071] [ 0.277503] Detected PIPT I-cache on CPU7 [ 0.277576] CPU7: Booted secondary processor 0x0000000103 [0x411fd071] [ 0.277753] smp: Brought up 1 node, 8 CPUs [ 0.277977] SMP: Total of 8 processors activated. [ 0.277996] CPU features: detected: 32-bit EL0 Support [ 0.290439] CPU: All CPU(s) started at EL1 
Select Language